安徽合肥包河CCH500-2齿轮泵,伺服泵

齿轮泵及马达使用注意说明：
1、 严禁用户自行拆卸，否则生产厂家不能产品的性能与质量。
2、 泵或马达所在的液压系统过虑装置精度很小，油液中不得混有机械杂质和腐蚀物质，容易形成油路阻塞而造成的损失。
3、 泵或马达的安装，进出油口应安装牢固，密封装置要可靠，否则吸入空气或漏油现象，影响泵或马达的性能。
我这边就简单的说一下，咨询客服，下单后会告诉你全过程。
Gear pump use notes:
1. Users are strictly prohibited to disassemble by themselves, otherwise the manufacturer cannot guarantee the performance and quality of the product.
2. The precision of the hydraulic system alarming device where the pump or motor is located is very small, and the oil shall not be mixed with mechanical impurities and corrosive substances, which is easy to form the loss caused by oil blockage.
3, the installation of the pump or motor, the inlet and outlet of the oil should be firmly installed, the sealing device should be reliable, otherwise the inhalation of air or oil leakage phenomenon, affect the performance of the pump or motor.
I will tell you the whole process after placing an order after consulting customer service. Whatsapp+86-

林工液压有限公司专营液压泵、齿轮泵、马达、底盘件及发动机销售，在上海已有30多年的历史，拥有全套测试设备校正液压泵、马达。
更是苦心研究多联泵2-5联泵，得到广大用户的信任及支持，进一步的发展下来，谢谢各位老板的支持。
公司采用齿轮泵的特点：结构简单紧凑、体积小、价格便宜，自吸力强，能耐冲击性负载，工作可靠等优点，设计成重铲用的齿轮泵。
Lingong Hydraulic co., Ltd. specializes in the sales of hydraulic pumps, gear pumps, motors, chassis parts and engines. With a history of more than 30 years in Shanghai, we have a full set of testing equipment to calibrate hydraulic pumps and motors.
But also painstakingly study the multi-pump 2-5 pump, get the trust and support of the majority of users, further development down, thank you for the support of the boss.
The company adopts the characteristics of gear pump: simple and compact structure, small volume, cheap price, strong self-suction, impact load resistance, reliable work and other advantages, designed into a heavy shovel gear pump.

林工液压有限公司设计的齿轮泵简介如下：
1.公称压力16-20/20-25/25-35 bar
2.采用滑动轴承，适合重负荷应用
3.传动轴符合 ISO 或 SAE 要求
4.可以实现多台泵的组合
5.管路油口：采用连接法兰或内螺纹
6.通过大规模生产，实现持续的
7.可提供多种配置变型
车主在下单前请咨询一下，在各行各业中很多产品外表看似一样，但质量不同，
The gear pump designed by Lin Gong Hydraulic Co., LTD is introduced as follows:
1. Nominal pressure 16-20/20-25/25-35 bar
2. Using plain bearing, suitable for heavy load applications
3. Drive shaft meets ISO or SAE requirements
4. Can realize the combination of multiple pumps
5. Pipeline oil port: use connecting flange or internal thread
6. Achieve continuous high quality through mass production
7. Can provide a variety of configuration variations
Car owners please consult before placing an order. In all walks of life, many products look the same but have different qualities.