关键词 |
神钢25T3035Q2516 |
面向地区 |
全国 |
泵轴位置 |
卧式 |
叶轮数目 |
多级 |
材质 |
铸铁 |
压力 |
25 Mpa |
驱动方式 |
汽动 |
性能 |
自动 |
用途 |
试压泵 |
原理 |
齿轮泵 |
公司专营重型起重机及船航的设备系统:如打桩机、吊机、船航、履带吊等带油压的设备用泵。包装用木箱包装。可提供技术参考。
公司有产品如:日本油研YUKEN、东芝简称KOBELCO、川崎KAWASAKI、神钢SK、卡特CAL、住友SL的柱塞泵、齿轮泵、叶片泵及配件。液压泵配件及总成,各种补油泵,齿轮泵,轴承,油封,低盘件,发动机配件,搅拌车配件发动机及油泵总成。订做种各种齿轮箱、油缸及各种齿轮。 在机械及行业设备-泵行业获得广大客户的认可。公司秉承“质量,保持信誉”的经营理念,坚持“客户”的原则为广大客户提供的服务。欢迎来电洽谈业务!
The company specializes in heavy crane and shipping equipment system: such as pile driver, crane, shipping, crawler crane with oil pressure equipment pumps. The package is packed in wooden cases. Can provide technical reference
The products are as follows:
Kawasaki, Toshiba, Linde, Caterpillar, Rexroth, UCHDA gear pump, VOITH gear pump, IHI, KYB, Staffa,HAGGLUNDS etc.
Five star motor, hydraulic pump, hydraulic motor, gear pump welcome to consult Whatsapp+86-
齿轮泵及马达使用注意说明:
1、 严禁用户自行拆卸,否则生产厂家不能产品的性能与质量。
2、 泵或马达所在的液压系统过虑装置精度很小,油液中不得混有机械杂质和腐蚀物质,容易形成油路阻塞而造成的损失。
3、 泵或马达的安装,进出油口应安装牢固,密封装置要可靠,否则吸入空气或漏油现象,影响泵或马达的性能。
我这边就简单的说一下,咨询客服,下单后会告诉你全过程。
Gear pump use notes:
1. Users are strictly prohibited to disassemble by themselves, otherwise the manufacturer cannot guarantee the performance and quality of the product.
2. The precision of the hydraulic system alarming device where the pump or motor is located is very small, and the oil shall not be mixed with mechanical impurities and corrosive substances, which is easy to form the loss caused by oil blockage.
3, the installation of the pump or motor, the inlet and outlet of the oil should be firmly installed, the sealing device should be reliable, otherwise the inhalation of air or oil leakage phenomenon, affect the performance of the pump or motor.
I will tell you the whole process after placing an order after consulting customer service. Whatsapp+86-
林工液压有限公司设计的齿轮泵简介如下:
1.公称压力16-20/20-25/25-35 bar
2.采用滑动轴承,适合重负荷应用
3.传动轴符合 ISO 或 SAE 要求
4.可以实现多台泵的组合
5.管路油口:采用连接法兰或内螺纹
6.通过大规模生产,实现持续的
7.可提供多种配置变型
车主在下单前请咨询一下,在各行各业中很多产品外表看似一样,但质量不同,
The gear pump designed by Lin Gong Hydraulic Co., LTD is introduced as follows:
1. Nominal pressure 16-20/20-25/25-35 bar
2. Using plain bearing, suitable for heavy load applications
3. Drive shaft meets ISO or SAE requirements
4. Can realize the combination of multiple pumps
5. Pipeline oil port: use connecting flange or internal thread
6. Achieve continuous high quality through mass production
7. Can provide a variety of configuration variations
Car owners please consult before placing an order. In all walks of life, many products look the same but have different qualities.
全国神钢25T3035Q2516热销信息